KLR650 40mm Lowering Footpegs

KLR650 lowering footpegs to suit Gen 2. May also suit Gen 1 bikes. These will not fit Gen 3 2021+ models. Very limited stock at present. We aim to have more in stock soon.

 

These pegs will lower your footpeg approx 40mm and push it 25mm rearward for extra boot clearance to your gear lever and an overall better position for taller riders. These pegs are made from the same thickness materials as the factory pegs and are proudly made in Australia.  Please note that running footpegs this low may require modifications to your brake lever further than the master cylinder can adjust. 

 

The pegs are finished in a wrinkle coat black paint after being jigged and welded. Whilst we aim to make every set of pegs perfect the wrinkle coat may not always come out perfect and even with using a jig please be aware there may be a 1-2mm tolerance on welded parts due to the heat introduced during the welding process. All pegs are placed back into the jig however after cooling to ensure they are within our tolerances of acceptable. As with all our products these footpegs are designed for offroad use. 

 

Please note only the pair of lowering peg brackets is included. You will need to re-use your existing factory or aftermarket footpegs and mounting bolts. Basic installation instructions are included.